亚洲欧洲二区_久久精品三_伦一理一级一a一片_中国做受xxxxxaaaa_自拍av在线_欧洲一区二区视频在线观看

ATG12CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG6CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG3CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG1.5CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG09CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG045CN日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG60CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG36N-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG15CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG150CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板： 日韩一二三区在线观看 | 久久久久爽爽爽爽一区老女人 | 校园春色 自拍偷拍 | 亚洲精品影院 | 成人福利在线视频 | 亚洲成人久久影院 | 日韩—二三区免费观看av | 免费观看激色视频网站在线观看 | 欧美一区二区三区激情视频 | 天天做爰天天爽 | 高清色免费 | 国产在线精品一区二区在线播放 | 日韩精品久久一区二区 | 少妇黄色大片 | 免费播放一区 | 涩涩网站直接看 | 国模吧久久| 岛国AV在线无码播放 | 精品久久久久久综合日本欧美 | 狠狠躁夜夜躁人人爽天天69 | 亚洲精品黑牛一区二区三区 | 密芽av | 粉嫩av一区二区三区在线 | 国产一区二区在线看 | 奇米在线视频 | 亚洲精品AV午夜一区二区三区 | 国产精品高清一区 | 青青久久91 | 国产精品伦一区二区三级视频永妇 | 九七涩涩视频 | 误杀2免费观看 | 在线观看网站懂得 | 国产精品欧美一区二区三区奶水 | 国产a免费视频 | 免费一级a毛片夜夜看 | 欧美激情第一区 | 国产成人精品免费 | 国产亚洲欧美日韩在线观看一区二区 | 国产91久久久久蜜臀青青天草二 | 久久久久久夜精品精品免费 | 久草网视频 |